Products > Cured Products > Tapes: Electrical - Industrial / Aviation / Military
Branded Equivalent Silicone Rubber Self Fusing Electrical Tape meeting A-A-59163 / MIL-I-46852 & MIL-I-22444 Specifications - Part 1
Branded Equivalent Silicone Rubber Self Fusing Electrical Tape meeting A-A-59163 / MIL-I-46852 & MIL-I-22444 Specifications
365°F / 180°C Continuous Exposure: Higher Intermittent
FlameShield™ rectangular (Type I) and triangular (Type II) profile silicone rubber self-fusing self-amalgamating compression tapes meeting various OEM manufacturer's and A-A-59163, Mil-I-46852 or Mil-I-22444 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
The tape has no adhesive, but sticks to itself (self-fuses or self amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
This tape is available in oxide-red and black colors - other colors are custom run. The triangular tape has a guideline stripe in the center which aids in achieving a 50% spiral wrap. Triangular levelwrap tapes provide a smooth surface on spiral wrapping, preventing the tape wrap area from snagging when pulling a wire or cable through a bundle or over objects or openings.
FlameShield™ tapes meeting A-A-59163, Mil-I-46852 and Mil-I-22444 provide superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value. This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts.
Links to Specific OEM Equivalent Tapes:
- 20 PLYSIL 3455
- 3M 70 & 70HDT
- 4529670544 Markel 5970-00-955-9976
- 66N 67N 68N 69N 78N 79N
- Airbus ASNA5107
- Airbus ABS5334
- Amphenol Connector Backshell Clamp Isolation Bushing Tape
- Boeing HS5215E103 / HS5215E203
- Boeing / McDonnel Douglas DMS2186
- Cessna P840154-C4
- Cinch 26482
- Electric Traction Motor Coil Insulation and Connector Junction Tape
- ES7889 Systems & Electronics
- FAR 25.853 Appendix F Tape
- Garmin 249-00114-00
- General Dynamics P5384
- General Electric A50A493 & 3003M70
- General Electric A50E112
- General Electric EMS2074
- General Electric EMD8355873
- ITT CANNON Backshell Clamp Bushing Tape
20 PLYSIL 3455 Equivalent Silicone Rubber Self Fusing Electrical Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä T-SR-20-3455 is an 20 PLYSIL 3455 equivalent silicone rubber electrical tape is a self-fusing self-amalgamating tape meeting Mil and commercial specifications. The tape is commonly used as an electrical insulation tape and a primary insulator up to 180C or 356F.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
20 PLYSIL 3455 Equivalent Silicone Rubber Electrical Tape
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets MIL-I-46852 specifications.
$ 44.87
Add
3M 70 & 3M 70HDT Self Fusing Silicone Rubber Electrical Tape meeting MIL Specification
356°F / 180°C Continuous Exposure: Higher Intermittent - Class H Primary Insulation
FlameShieldä 3M 70 & 3M 70HDT equivalent self-fusing self-amalgamating silicone rubber electrical tapes are used as an overwrap for protection of terminating high-voltages cables against arcing and tracking failures. Cables with the following composition should be overwrapped: Butyl Rubber, Oil-based rubber, Ethylene Propylene rubber, PVC, low and high density polyethylene.
T-SR-3M70 is a .012" thick rectangular tape and T-SR-3M70HDT is a .020" thick triangular profile tape with guideline. Both have an interleave PET backing film that is easily removed while installing the tape.
These tapes are a blue-gray color. The triangular tape has a guideline stripe in the center which aids in achieving a 50% spiral wrap.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
3M 70 & 3M 70HDT Self Fusing Electrical Tape
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting 3M 70 & 3M 70 HDT specifications. Color is a blue-gray.
$ 0.00
Add
4529670544 Markel 5970-00-955-9976 Equivalent Electrical Insulating Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä Markel 4529670544 equivalent (NSN 5970-00-955-9976) triangular profile silicone rubber self-fusing compression tapes meeting MIL and commercial specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Markel 4529670544 NSN 5970-00-955-9976 Equivalent Tape
Silicone Rubber Self Fusing Tape
FlameShield Markel 4529670544 NSN 5970-00-955-9976 Equivalent Tape. Available in oxide-red or black.
$ 0.00
Add
66N 67N 69N 78N 79N Equivalent Silicone Rubber Electrical Insulation Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä 66N, 67N, 69N, 78N, 79N equivalent silicone rubber tapes meet MIL and commercial specifications and are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
Meets the following specifications:
· 66N - NSN 5970-14-467-8824
· 67N - NSN 5970-14-474-7041
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
66N 67N 69N 78N 79N Equivalent Tape 723
Silicone Rubber Self Fusing Tape
FlameShield 66N 67N 69N 78N 79N Equivalent Tape. 66N meets NSN 5970-14-467-8824 & 67N meets 5970-14-474-7041. Available in oxide-red or black. 723
$ 0.00
Add
A6900W Eaton Weatherhead Equivalent Silicone Elastomer Electrical Insulating Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä A6900W silicone rubber self-fusing compression tapes meet many MIL and commercial specifications and are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Eaton Weatherhead A6900W Equivalent
Silicone Rubber Self Fusing Tape
Eaton Weatherhead A6900W Equivalent High Temperature Silicone Rubber Self Fusing Electrical Tape meeting MIL-I-46852 and A-A-59163 specifications. Choose oxide-red or black color.
$ 0.00
Add
ASNA 5107-2501 5107-2502 5107-2503 Equivalent Silicone Rubber Electrical Insulation Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä ASNA5107 equivalent silicone rubber tapes meet MIL-I-22444 specifications and are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments. Available in 3 widths: 5107-2501, 5107-2502, 5107-2503.
Meets the following specifications:
· NSN 5970-01-325-8971 (SA version only), 5970-14-464-7312 (68N) is oxide-red
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
ASNA 5107 2501/2502/2503 Equivalent Silicone Rubber Electrical Insulation Tape 723
Silicone Rubber Self Fusing Tape
ASNA 5107 Equivalent Silicone Rubber Electrical Insulation Tape meeting MIL-I-22444 specifications. Choose oxide-red or black color. Available in 12 or 20 yard roll length. 723
$ 0.00
Add
ABS 5334 Airbus Standard 66N 67N Silicone Rubber Electrical Insulation Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä Airbus Standard ABS 5334 (66N & 67N) equivalent silicone rubber tapes meet MIL and commercial specifications and are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
May also be cross-referenced to:
· 66N - NSN 5970-14-467-8824
· 67N - NSN 5970-14-474-7041
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
ABS 5334 Airbus Standard 66N 67N Equivalent Silicone Rubber Electrical Insulation Tape
Silicone Rubber Self Fusing Tape
ABS 5334 Airbus Standard 66N 67N Equivalent Silicone Rubber Electrical Insulation Tape meeting MIL-I-46852 and A-A-59163 specifications.
$ 0.00
Add
Amphenol Connector Backshell Clamp Isolation Tape/Bushing
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä Amphenol connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief. Popular for use in avionics and marine wiring.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Amphenol Connector Backshell Clamp Isolation Bushing Tape
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets A-A-59163 specifications.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
$ 0.00
Add
Boeing HS5215E103 / HS5215E203 Silicone Rubber Electrical Insulation Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä tape meeting Boeing HS5215E103 & HS5215E203 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
This tape is commonly specified for use on Apache helicopter airframes and has an NSN number assignment of 5330-01-479-4233 / 530-01-479-4235. Alternate P/N for HS5215E103 is RM011875.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Boeing HS5215E 103 & 203 versions
Silicone Rubber Self Fusing Tape
Boeing HS5215E (103 & 203) tape. This tape is black.
$ 0.00
Add
DMS2186 Mil Spec McDonnel Douglas / Boeing Silicone Rubber Self Fusing Electrical Insulation
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä rectangular and triangular profile tapes meeting DMS2186 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Boeing McDonnel Douglas DMS 2186 Electrical Insulating Tapes
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing re-inforced limited stretch silicone rubber tape. Meets Boeing - McDonnel Douglas DMS 2186 / MIL-I-22444 specifications for Type I and DMS 2186 / AA-59163 for Type II.
Type I tapes are rectangular profile and also reinforced ("supported"). Type II tapes are triangular profile. (Similar to a Type I in MIL-I-46852 specification). Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
Type I tapes are rectangular profile and also reinforced ("supported"). Type II tapes are triangular profile. (Similar to a Type I in MIL-I-46852 specification). Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
$ 0.00
Add
P840154-C4 Cessna Guideline Silicone Rubber Self Fusing Electrical Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä P840154-C4 Cessna guideline equivalent silicone rubber electrical tape is a self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief. Popular for use in avionics wiring.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Cessna P840154 Guideline Tape
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets Cessna P840154 specifications.
$ 44.87
Add
Cinch 26482 Series Connector Backshell Clamp Isolation Tape/Bushing
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä Cinch 26482 connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief. Popular for use in avionics and marine wiring.
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Amphenol Connector Backshell Clamp Isolation Bushing Tape
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets A-A-59163 specifications.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
$ 0.00
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Locomotive Electric Traction Motor Coil Insulation & Connector Junction Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
Withstands Molten Splash & Welding Splatter/Grinding Sparks
Custom fabricated insulated wrapping tape for pipe, hose and line protection: high temperature protection and cold temperature protection.
Primary Field Coil Insulation Tape:
- GE 84A210606P154 & GE 84A210606P157; Our part number T-SR-84
- GE 41A239176P70 & GE 41A239176P71; Our part number T-SR-41
- EMD 8205562, EMD 8227441, EMD R718024; Our part number T-SR-82 meets EMS 558 specification
- EMD R718051, EMD R718077, EMD 8220410, EMD 40100391, EMD 8257527; Our part number T-SR-71 meets EMS 558 specification
- GE 21261; Our part number T-SR-21
- GE 84A210606P158; Our part number T-SR-158
Self-fusing Connector Junction Insulation Tape:
- EMD 8355873; Our part number T3020-R004-12 meets GE A50E112, EMS 2074 specification
- EMD 4089227, GE 84A210606P152; Our part number P3272-10R12-P4 meets EMS 2074 specification
ES7889 Systems and Electronics Equivalent Silicone Rubber Self Fusing Electrical Tape
-65°F to +500°F / -54°C to +260°C Continuous Exposure: Higher Intermittent
ES7889 rectangular (Type I) and triangular (Type II) profile silicone rubber self-fusing self-amalgamating electrical tapes meet MIL and commercial specifications are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
ES7889 Systems & Electronics Electrical Insulating Tapes
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets Systems & Electronics ES7889 specifications.
Available in Type I (Rectangular) and Type II (Triangular) profile. Available in Black or Oxide-red color.
Available in Type I (Rectangular) and Type II (Triangular) profile. Available in Black or Oxide-red color.
$ 0.00
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
FAA FAR 25.853 Appendix F Meeting Horizontal & Vertical Burn Rate Limits Silicone Rubber Self Fusing Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä rectangular and triangular profile tapes meeting the FAA FAR 25.853 burn rate limit specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
FAA FAR 25.853 Appendix F - Burn rate limits tape
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape meets FAA FAR 25.853 for horizontal and vertical burn rate limits.
Type I tapes are rectangular profile. Type II tapes are triangular profile. Tapes are a brown/oxide color.
Add Certificate of Conformance if required at the bottom of the pick list.
Type I tapes are rectangular profile. Type II tapes are triangular profile. Tapes are a brown/oxide color.
Add Certificate of Conformance if required at the bottom of the pick list.
$ 0.00
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
Garmin 249-00114-00 Silicone Rubber Self Fusing Electrical Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä Garmin 249-00114 equvalent silicone rubber self-fusing self-amalgamating tape meets MIL and commercial specification for use in avionics wiring. Popular for protecting wiring at the backshell clamp.
Garmin-Avionics Silicone Tape 249-00114
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting Garmin 249-00114-00 specifications. Choose oxide-red or black color.
$ 33.64
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
General Dynamics P5384 Silicone Rubber Electrical Insulation Tapes NSN 9320-01-310-3746
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä rectangular and triangular profile self-fusing self-amalgamating tapes meeting General Dynamics P5384 specification (NSN 9320-01-310-3746) are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
50997 AR 386B FNOK
General Dynamics P5384 Silicone Tape
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting General Dynamics P5384 specifications. Color black is specified.
$ 37.91
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
General Electric Power Generation A50A493 & 3003M70 Silicone Rubber Self Fusing Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä A50A493A, A50A493B, A50A493C, A50A493D, 3003M70P01, 3003M70P02, 3003M70P03 and 3003M70P04 rectangular and triangular profile tapes meeting GE General Electric Power Generation A50A493 & 3003M70 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
Part Number: T-SR-GEPG
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting General Electric Power Generation specifications.
$ 0.00
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
General Electric Transportation Systems A50E112 Silicone Rubber Self Fusing Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä rectangular profile tapes meeting GE General Electric Transportation Systems A50E112 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs.
General Electric A50E112
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting General Electric Transportation Systems Junction Insulation Tape specifications.
$ 67.29
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
General Electric Transportation Systems EMS2074 Silicone Rubber Self Fusing Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä rectangular profile tapes meeting GE General Electric Transportation Systems EMS2074 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs.
General Electric EMS2074
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting General Electric Transportation Systems Junction Insulation Tape specifications.
$ 0.00
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
General Electric Transportation Systems EMD8355873 Silicone Rubber Self Fusing Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä rectangular profile tapes meeting GE General Electric Transportation Systems EMD 8355873 specification are used for a variety of critical electrical wiring and cable splicing and protection jobs.
General Electric EMD 83558731
Silicone Rubber Self Fusing Tape
FlameShield High Temperature Silicone Rubber Self Fusing Electrical Tape meeting General Electric Transportation Systems Junction Insulation Tape specifications.
$ 67.29
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.
 |
 |
 |
ITT Cannon Connector Backshell Clamp Isolation Tape/Bushing
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä ITT Cannon connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief. Popular for use in avionics and marine wiring.
ITT CANNON Connector Backshell Clamp Isolation Bushing Tape
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets A-A-59163 specifications.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required.
$ 0.00
Add
Add CofC or Test Reports for Products
CofC and Test Report documentation can be added to your order using the cart.